Telephone Set Up
You can customize the following settings to suit your needs.
Rings to Answer
Message Length
Recording Quality Sets the recording quality between
Remote Access
Display Contrast
Local Area Code
TONE/PULSE Dialing Sets the phone for tone or pulse dialing.
Set Day
Time/Date
Language
Setting the Rings to Answer
This setting allows you to set the number of rings before the unit answers a call. You
can choose from 2-8 or Toll Saver (see "Toll Saver.")
1. Press and release the MENU button. The screen displays RING TO ANSWER. The
unit announces, Setup Menu. Use SKIP to change setting. Press MENU to save
a setting.
2. Use SKIP or REPEAT for the desired setting (2-8, Toll Saver).
3. When finished, press MENU to confirm.
NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.
Selects the number of rings before
the unit answers.
Sets the length of time allowed for
incoming messages.
standard (STD) and long play (LONG).
Set your 3-digit code used for remote
access to the unit.
Selects the display contrast.
Sets your local area code for Dial Back.
Sets the day.
Sets the time and date.
Selects English, French or Spanish.
Default Settings
Rings to Answer
4
Message Length
2 minute
Recording Quality
Standard
Security Code
1 2 3
Display Contrast
3
Local Area Code
– – –
Dialing
Tone
Day
Sunday
Time/Date
12 a.m. 1/01
Language
English
1