Selecting The Multi-Effects Type - Roland Groovebox MC-307 Reference Manual

Selecting the Multi-Effects Type

Procedure
1. Press the [PTN] button.
The screen for playing patterns appears.
2. Press the [F2 (STUP] button.
3. Press the [F4 (M-FX)] button.
The screen for selecting the types of Multi-effects
appears.
4. Use the [VALUE] dial or the [INC/DEC] buttons to select
the type of Multi-effects.
5. Upon selection, press the [EXIT] button to return to the
screen for playing the patterns.
Chapter 4 Setting Effects
Available Settings:
No M-FX TYPE
1 4BAND EQ modify the tone
2 SPECTRUM add character to the sound
3 ENHANCER add sparkle to the sound
4 OVERDRIVE distort the sound mildly
5 DISTORTION distort the sound severely
6 LO-FI simulate a "low-fidelity" sound
7 NOISE add various types of noise
8 RADIO simulate a radio being tuned
TUNING
9 PHONO- simulate an old record
GRAPH
10 COMPRES- make the volume level more con-
SOR sistent
11 LIMITER smooth out irregularities in volume
12 SLICER apply successive cuts to the sound
13 TREMOLO cyclic changes in volume
14 PHASER modulate the sound
15 CHORUS add spaciousness and depthto the
sound
16 SPACE-D add transparent depth
17 TETRA layer chorus sounds to add spa-
CHORUS ciousness
18 FLANGER add metallic resonance to the
sound
19 STEP add metallic resonance to the
FLANGER sound while changing the pitch in
steps
20 SHORT add echoes to the sound
DELAY
21 AUTO PAN automatically move the stereo
location
22 FB PITCH skew the pitch
SHIFTER
23 REVERB add reverberation
24 GATE sharply cut the reverberation
REVERB
25 ISOLATOR Cuts off a specific range
Description
47