9. Phonograph
(Simulates an Old Record)
This effect mutes the tone and adds disc noise to simulate the
sound of music played on an old record player.
Available Settings:
- DISC TYPE [CTRL 1]
Determines the type of disc noise.
Range:
LP: 33 RPM record
EP: 45 RPM record
SP: 78 RPM record
- DISC NOISE LEVEL [CTRL 2]
Specifies the volume of the disc noise.
Range: 0–127
- DEPTH [CTRL 3]
Adjusts the tone.
Range: 0– +20
As this value is increased, the high range and low range
will be cut, and the mid range will be emphasized.
- OUTPUT PAN [CTRL 4]
Specifies the stereo location of the output from the
Phonograph effect.
Range: L64–63R
- OUTPUT LEVEL [CTRL 5]
Specifies the output volume from the Phonograph effect.
Range: 0–127
Chapter 4 Setting Effects
10. Compressor
(Make the Volume Level More
Consistent)
This effect suppresses loud volume levels and boosts soft
volume levels, making the volume more consistent.
Available Settings:
- ATTACK [CTRL 1]
Specifies the duration of the attack when sound is input.
Range: 0–127
- SUSTAIN [CTRL 2]
Specifies the time over which low-level sounds will be
boosted to reach the specified volume.
Range: 0–127
- POST GAIN [CTRL 3]
Adjusts the output signal.
Range: 0, +6, +12, +18
- LOW GAIN [CTRL 4]
Adjusts the boost or cut of the low frequency range.
Range: -15– +15
- HIGH GAIN [CTRL 5]
Adjusts the boost or cut of the high frequency range.
Range: -15– +15
- OUTPUT LEVEL [CTRL 6]
Specifies the output volume from the Compressor effect.
Range: 0–127
53