Cleaning The Inside Of The Face Plate - Janome Sewing Machine Getting Started Manual

6
8
7
11
9
10
103
Assembling the hook race
6. Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
Insert the bobbin.
8 Knob
9 Stopper
7. Reattach the needle plate, aligning the guide holes
on the needle plate with the needle plate guide pins
and tighten the screw.
10 Guide holes
11 Needle plate guide pins
NOTE:
After cleaning the machine, make sure the needle and
presser foot are attached.

Cleaning the Inside of the Face Plate

Press the up/down needle button to raise the needle, then
unplug the sewing machine.
Remove the needle and presser foot.
Open the face plate and clean the dust and lint with the lint
brush.
Clean this area every time after sewing work is finished.
NOTE:
If you embroider stipple quilting, especially with cotton
threads which generate large amount of lint, clean the hook
race and inside the face plate more frequently.