Setting The Embroidery Carriage Arm - Janome Sewing Machine Getting Started Manual

Setting the Embroidery Carriage Arm

Turn the power switch on and raise the presser foot.
Press down and hold the carriage release lever and
swing out the carriage arm until it is fully extended.
Release the carriage release lever.
Press the embroidery mode key.
The visual touch screen will show a warning
message.
Press the OK key.
The carriage will move to the position for setting the
hoop.
NOTE:
Be sure to set the carriage arm in the extended position
before pressing the embroidery mode key.
CAUTION:
Do not push or lift the carriage once it is set in the
extended position to prevent it from being damaged.
67