Direct Pc-Link - Janome Sewing Machine Getting Started Manual

Edit
Open File
Location :
PC
Embf

Direct PC-Link

Connecting the machine and PC
The MC 11000 can be connected to the PC with the USB
cable included in the standard accessories.
You need to install the USB driver for the MC 11000 and
the PC Folder Tool on your computer.
The USB driver and PC Folder Tool are available in the
MC11K Tools CD-ROM included in standard accessories.
The PC Folder Tool allows you to transfer the data
bilaterally between the machine and PC.
NOTE:
Refer to the instruction booklet of the MC11K Tools
CD-ROM for more details.
Start up the MC 11000 and PC, and insert the type "A"
USB connector into the PC.
Insert the type "B" connector into the MC 11000.
Press the PC-link tab to establish the communication
between the MC 11000 and PC.
Now, you can save and open the files, or transfer the data
between the MC 11000 and PC.
Built-in
ATA
A
Card
USB
CAUTION:
memory
Do not turn the power off or disconnect the USB cable
CD
ROM
while the data transfer is in progress.
PC
Otherwise the data will be lost or the memory
will be damaged.
97