Optional Items; Pc Design Cards - Janome Sewing Machine Getting Started Manual

3
2
1001
ST: 126x110mm
1
1/3
A Z
98

OPTIONAL ITEMS

PC Design Cards

You can import attractive embroidery designs from the
optional PC Design cards.
Inserting the PC Design card
Insert the PC Design card into the slot with the front
side of card facing to you.
Push the card until it clicks, then the eject button will
pop out.
1 Front side of card (Marked with a triangle)
When the card is properly set, the red bar on the eject
button will pop up.
2 Eject button
3 Red bar
Ejecting the PC card
Press the eject button to eject the PC card.
Take out the PC Card from the machine.
NOTE:
When turning the power switch on with the PC card
inserted, it will take sometime to start up the machine.
Importing embroidery designs from a PC Design
card.
Press the card tub in the embroidery mode.
The pattern selection window of the PC Design card will
open.
Press the next page key to view the rest of the card
contents.
Press the icon key of the design you wish to import.
NOTE:
You cannot access PC Design cards from the open file
mode.
CAUTION:
Do not turn the power off, eject the card or remove the
USB memory key while a warning message has been
displayed on the screen.
Otherwise the saved data will be lost or the memory
will be damaged.