Janome Sewing Machine Getting Started Manual page 71

Completed
Emerald Green 250
Stitch Counter
00000
2
d
ST:126x110mm
18 min
1
7,013 ST
3
ST:126x110mm 2 Auto
1
18 min
6 Colors
7,013 ST 70x79mm
600 spm
1
3
START
STOP
5
Default
2.6
+
X
-
OK
Auto
2
6 Colors
70x79mm
600 spm
1 Trace key
You can check the size of the sewing area by tracing the
design outline without stitching or with basting stitches.
When you press the tracing key, the tracing option window will
open. Press the
or press the
tracing with basting stitches.
Press the OK key to start tracing with basting stitches.
The carriage will returned to the starting position after
tracing.
NOTES:
Bring the bobbin thread up before tracing with basting
4
stitches.
The machine will baste around the embroidery area with a
5 mm allowance when "tracing with basting stitch" is
selected.
However, an allowance will be null If the pattern spreads
over the maximum limit of embroidery area.
2 Stitch back/forward keys
When embroidery sewing has started, the screen will
indicate the current stitch count. The jog keys will
disappear and the stitch back/forward keys will be shown
instead. You can use these keys to move the embroidery
hoop to where the thread has broken or run out.
Press the "–" key to move the hoop back to a previous
sewing point.
Press the "+" key to move the hoop ahead. The hoop will
move one stitch each time the key is pressed. Hold down
the key to travel faster and jump 10 or 100 stitches at a
time
3 Jog/ST key
Press this key to switch the jog keys to the stitch back/
forward keys or vice versa.
To use the jog keys after sewing has started, stop the
machine and return the stitch counter to zero by pressing
the stitch back key.
4 Tension adjust key
When pressing this key the thread tension adjust window
will open. You can adjust the auto thread tension level by
pressing the "+" or "–" key. Press the default key
return the tension setting to the default.
5 Tension adjust window
Screen Information
Beside the design image, the approximate sewing time in
minutes, number of colors, design size and the hoop that
should be used for the selected design are shown.
2
1 Sewing time in minutes
2 Number of colors
4
3 Total stitch count of the design
4 Design size
72
key to start tracing without stitching,
key to open the confirmation window for
to