Service Access; Face Plate; Belt Cover; Bed Base Plate - Janome JF Series Service Manual

FCE PLATE
TO REMOVE
1. REMOVE THE FACE PLATE BY REMOVING THE CAP AND SET SCREW.
TO ATTACH
2. MOUNT THE FACE PLATE BY THE SET SCREW, AND THEN, MOUNT THE CAP.

BELT COVER

TO REMOVE
1. LOOSEN TEN SET SCREW, AND REMOVE THE BELT COVER BY REMOVING THE
BELT COVER RIB FROM THE FRONT COVER.
TO ATTACH
2. MOUNT THE BELT COVER RIB TO THE FRONT COVER, AND THEN, MOUNT THE
BELT COVER BY THE SET SCREW.
BASE COVER
TO REMOVE
1. REMOVE THE BASE COVER BY FOUR SET SCREWS.
TO ATTACH
2. MOUNT THE BASE COVER BY FOUR SET SCREWS.
NOTCH
CAP
SET SCREW

SERVICE ACCESS

FACE PLATE

BASE COVER
www.promelectroavtomat.ru
FRONT COVER
SET SCREW
SET SCREW
4
RIB
BELT COVER
SET SCREW
BASE COVER