Fringing; Drawn Work; Pull Up The Bobbin Thread And Draw A 10 Cm (4˝) Thread; Use The Thread Cutter On The Face Plate - Janome Memory Craft 8200QC Instruction Book

Janome 8200 Sewing Machine Instruction Manual
q
e
r
q
e
r
z
www.janomeflyer.com

Fringing

w

Machine settings

q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Fringing adds a special touch on table linens and shawls.
Choose a firm, woven fabric like linen where threads can
be removed easily.
Carefully cut the fabric on the grain. Remove a single
strand of yarn or thread where the fringing is to begin.
Sew down the left side so the right hand stitches fall in
the open space.
Remove all excess yarn located to the right of the
stitching and create a fringe.

Drawn Work

w
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Drawn work uses the same method as fringing. Choose
a firm, woven fabric like linen where threads can be
removed easily.
z Carefully cut the fabric on the grain. Determine the
60
MODE 3: 05
AUTO
Satin stitch foot F
4
MODE 3: 05
AUTO
Satin stitch foot F
4
width of the drawn work and remove one strand of
yarn or fabric thread at each end.
NOTE:
Pull up the bobbin thread and draw a 10 cm (4˝)
thread tail to the back before starting to sew.

Use the thread cutter on the face plate.

MC8200 Owners Manual/ User Guide