Controlling Sewing Speed - Janome Sewing Machine Getting Started Manual

Utility(U)
Straight Stitch
1 2 3 4 5 6
8 9 10 11 12 13
15
16 17 18 19
B
A
7
14
9
Screen up/down button
The visual touch screen can be raised to open (clear)
the space for handling fabrics etc.
Pressing the button raises the screen, while
pressing the button lowers the screen.
CAUTION:
Be sure to store the visual touch screen in the lowest
position before carrying or storing the machine to
prevent the screen from damage by impact.
Do not force to move the visual touch screen by hand.
Do not press the surface of the visual touch screen
with hard or sharp objects like pencils, screwdrivers or
the like. Use the touch panel stylus to press the visual
touch screen.

Controlling Sewing Speed

Speed control slider
You can limit the maximum sewing speed with the
speed control slider according to your sewing needs.
To increase the sewing speed, move the slider to the right.
To decrease the sewing speed, move the slider to the left.
Foot control
Pressing on the foot control can vary sewing speed.
The harder you press the foot control, the faster the
machine runs.
NOTE:
The machine runs at the maximum speed set by the
speed control slider when the foot control is fully
depressed.
Operating Instructions:
Foot controller Model 21371 is for use with sewing
machine model MC 11000.
NOTE:
This machine is equipped with an automatic shutdown
safety feature to prevent overheating whenever the
machine is running overloaded. Follow the safety
instructions that appear on the visual touch screen.