Rx Speaker Function - Icom IC-M604 Instruction Manual

7
OTHER FUNCTIONS
q Push [F], then push [8•
Push ,
then push
w Rotate [SELECTOR] to select the desred foghorn pat-
tern, push [ENT].
• 'UNDERWAY,' 'STOP,' 'SAIL,' 'TOW' are avalable. (p. 41)
• Even f [ENT] hasn't been pushed, the dsplay automatcally
changes to the next step after about 5 sec. of nactvty.
e Rotate [SELECTOR] to adjust the foghorn level, push [ENT].
• The foghorn level s adjustable n 31 steps.
• Even f [ENT] hasn't been pushed, the dsplay automatcally
changes to the next step after about 5 sec. of nactvty.
Rotate
25W
TAG
FOGHORN
15
Foghorn
<ENT ˘ OK>
level
The foghorn pattern, selected
r To return to normal operaton, repeat step q.
When a DSC call s receved, the automatc foghorn func-
ton s nterrupted wth an automatc return to the trans-
cever mode. The transcever's dsplay ndcates 'Recev-
ng DSC calls.' (p. 32)
42
] to enter auto foghorn mode.
FOG
25W INT
TAG
˘UNDERWAY
STOP
<ENT˘OK> CALLING
INT
Push
25W INT
TAG
CALLING
FOGHORN
15
UNDERWAY CALLING

■ RX speaker function

The IC-M604 has an RX speaker functon. When ths func-
ton s turned ON, the receved audo can be heard on the
deck or tower va a haler speaker.
Connect a haler speaker as descrbed on page 46.
q Push [F], then push and hold [7•
the RX Speaker mode.
• "RX " appears.
Push ,
then push and hold
RX
for 1 sec.
15
<ENT ˘ OK>
w Rotate [SELECTOR] to adjust the audo output level,
push [ENT].
e To return to normal operaton, repeat step q.
Whle n the RX speaker mode, rotate [SELECTOR]
whle pushng and holdng [7•
adjust the audo output level. After adjustng, push [ENT].
• Rotate [SELECTOR] wthn 1 sec. after pushng [7•
Otherwse the transcever returns to the normal operaton.
] for 1 sec. to enter
HAIL
25W INT
RX
TAG
CALLING
] after pushng [F], to
HAIL
HAIL ].