3
CONNECTION AND MAINTENANCE
■ Mounting the transceiver
The front panel can be nverted for correct vewng whle
leavng the bult-n speaker facng away from the mountng
surface.
D Inverting the Front panel
q Unscrew the 2-sde screws.
w Detach the Front panel forward from the transcever.
e Bend the flat cable between Front panel and man unt as
shown n the followng dagram.
13
Flat cable orientation
normal bend line
inverted
bend line
to Front panel
r Invert the transcever 180 degrees clockwse as below.
t Re-attach the Front panel to the transcever.
y Tghten the 2 screws.
CAUTION:
• NEVER rotate the transcever more than 180 degrees.
• DO NOT bend the flat cable too hard. Damage may occur.
NOTE: Be sure to bend the flat cable n the
to MAIN unit
correct drecton, before turnng over
(nvertng) the transcever.