Control Panel; Select; Numbers - Husqvarna Automower 210 C Operator's Manual

5. Control panel

The control panel on Husqvarna Automower
consists of indicator lamps and a keypad. All
information is shown through the indicator lamps and
all input is done using the buttons.
The control panel consists of three groups of buttons:
select, numbers and main switch, and indicator
lamps..

5.1 Select

1. Cancel:
• Press to interrupt an ongoing input or to reset
the mower when a fault message is shown.
2. YES:
• Press to confirm the entered PIN code.

5.2 Numbers

3. Press to state the PIN code.
Also use the special command: See 4.6
Changing the PIN code on page 30.
32 - English
5. CONTROL PANEL
®
1 2