Restart; Switching Off Automower; Using The Timer - Husqvarna Automower 210 C Operator's Manual

4.3 Restart

To start:
1. Enter the PIN code.
2. Press the YES button.
3. Close the control panel cover.

4.4 Switching off Automower

1. Press the STOP button.
2. Set the main switch to the OFF position.
Always switch off Automower
if you intend to perform maintenance or move the
mower outside of the working area.

4.5 Using the Timer

The lawn should not be mown for too long to obtain the
best result. Use the timer function to avoid flattening
the lawn and to get the maximum service life for your
Automower .
®
The timer function allows the user to select whether the
mower is to mow for 1, 2, 3 or the maximum number of
hours. The timer is especially useful for mowing small
areas, because it will not then be necessary for the
Automower ® to use its full capacity.
To set the Timer:
1. Enter the PIN code, and confirm with the YES
button.
2. Press and hold the number 1, 2 or 3 for two
seconds, depending on whether you want the
Automower to mow for one, two or three hours.
®
3. A double beep confirms your selection and the
indicator lamp for the PIN code goes off. It stays
off until you release the key (number).
4. Close the cover within 20 seconds, otherwise the
selected Timer settings will not be stored. The
timer is also reset every time the STOP button is
pressed
28 - English
4. USE
®
® using the main switch