Husqvarna Automower 210 C Operator's Manual page 17

Best position for the boundary wire
The boundary wire should be laid so it:
• Forms a loop around the working area for
Automower ® . Only an original boundary wire must
be used. This is tinned and has a high quality
insulation to withstand the dampness in the
ground.
• Is a maximum of 350 metres long.
• Maintains a maximum distance of 25 metres from
Automower in the entire working area.
®
• The boundary wire is laid at different distances
from obstacles depending on what the working
area borders. The picture below shows how the
boundary wire should be routed around the
working area and around obstacles.
18 - English
3. INSTALLATION