Control Panel - Husqvarna LC 247Li Workshop Manual

7.10 Control panel

7.10.1 To disassemble and assemble the control
panel on LC 347VLi and LC 247Li
1. Remove the 4 screws.
2. Disconnect the control panel cable from the circuit
board.
3. Assemble the control panel in the opposite
sequence. Use the correct torque. Refer to
data on page 13 .
7.10.2 To disassemble and assemble the control
panel on LC 247iX, LC 347iVX and LC 353iVX
1. Remove the 2 screws (A).
2. Remove the 3 screws (B).
3. Remove the lower part of the control panel (C). Lift
the top part of the control panel (D).
361 - 001 -
4. Disconnect the control panel cable (E) from the
circuit board (F).
A
Servicing
5. Assemble the control panel in the opposite
sequence. Use the correct torque. Refer to
data on page 13 .
B
B
Repair instructions - 33
D
E
C
E
F
Servicing