Configuring The Firmware; Changing The Firmware Configuration Parameters - Qlogic QLA4010 User Manual

Q
8. If the enabled targets are configured to use the same initiator name and secret,
perform the following steps. Otherwise, skip to
a. Select the Set Default Initiator Name and Secret box. The Initiator Name
b. Type the QLA4010/4010C HBA (initiator) name and secret in the Name and
9. If the enabled targets are configured to use different initiator names and secrets,
perform the following steps:
a. In the Initiator Name and Secret part of the page, double-click the Initiator
b. In the Initiator Name and Secret part of the page, double-click the Initiator
10. Click OK.
6.6

Configuring the Firmware

This section describes how to do the following:
Change the configured firmware values
■
Restore the factory defaults
■
Update the HBA with new firmware
■
Update the HBA with new ROM
■
Retrieve the HBA crash record
■
6.6.1

Changing the Firmware Configuration Parameters

Perform the following steps to edit the firmware configuration parameters:
1. Click the desired adapter in the HBA tree. By default, the HBA Options tabbed
page displays.
2. Click the Firmware tab.
IS0053302-00 7
and Secret part of the page becomes inactive (you cannot specify different
names and secrets for each target).
Secret fields in the Initiator portion of the page. The name can be a
maximum of 256 ASCII characters; the secret can be a maximum of
100 ASCII characters. The name and secret are automatically entered in
the Initiator Name and Secret part of the page.
Name field in the row of the target you want to program. Type in the name,
which can be a maximum of 256 ASCII characters.
Secret field in the row of the target you want to program. Type in the name,
which can be a maximum of 100 ASCII characters.
PRELIMINARY
6 – SANsurfer Control iX
Configuring the Firmware
step 9.
(see section 6.6.1)
6-31