Removing The Driver - Qlogic QLA4010 User Manual

Q
5. In the Install Hardware Device Drivers dialog box, select Display a list of
the known device drivers for this device so that I can choose a specific
driver
6. Click Next.
7. In the Select a Device Drive dialog box, click Have Disk. Insert the QLogic
driver disk created in
8. In the Install From Disk dialog box, type or browse the path to the QLogic
driver directory. For example:
Click OK.
9. In the Upgrade Device Driver Wizard/Select a Device Driver dialog box, click
Next.
10. In the Upgrade Device Driver Wizard/Start Device Driver Installation dialog
box, click Next.
11. If the Digital Signature Not Found dialog box displays, click Yes.
12. In the Upgrade Device Driver Wizard/Completing the Upgrade Device
Driver Wizard dialog box, click Finish.
13. The following message displays:
Click Yes to restart the computer.
After QLogic obtains a Digital Signature for the driver through the official WHQL
process from Microsoft, the Digital Signature Not found dialog box will not display.
(can this sentence, which is in other HBA user's guides, be removed?)
3.5

Removing the Driver

To uninstall the QLA4010.SYS driver, power down your computer and remove the
QLA4010/4010C HBA from your computer according to the manufacturer's
instructions.
NOTE:
IS0053302-00 7
section
A:\
Your hardware settings have changed. You must restart your
computer for these changes to take effect. Do you want to
restart your computer now?
You do not have to use the Device Manager or the Hardware Wizard to
uninstall the QLA4010/4010C HBA. After you have removed the
QLA4010/4010C HBA and restarted your computer, Windows 2000
recognizes that it has been removed.
PRELIMINARY
3 – Windows 2000 Driver Installation
3.3.
Removing the Driver
3-5