Configuring The Qla4010/4010C Hba; Firmware Upgrade; Hba Tabbed Page (Network) - Qlogic QLA4010 User Manual

6 – SANsurfer Control iX

Configuring the QLA4010/4010C HBA

6.4
Configuring the QLA4010/4010C HBA
The following sections provide instructions on how to configure the QLA4010/4010C
HBA:
Setting the IP address
■
Setting the domain name system (DNS) server address
■
Enabling service locator protocol (SLP)
■
Enabling internet storage name service (iSNS)
■
NOTE:
Perform the following steps to access the configuration options, located on the HBA
Options tabbed page.
1. Select an HBA in the HBA tree.
2. Click the HBA Options tab. The HBA Options tabbed page displays.
a. Entering a name in the HBA Alias box is optional (the default is none).
b. Entering a name in the HBA iSCSI Name box is optional (the default is the
6-22
(see section 6.4.1)
You must configure the QLA4010/4010C HBA before you can configure
targets, edit target and firmware configuration parameters, or perform a

firmware upgrade.

Figure 6-23. HBA Tabbed Page (Network)
iSCSI standard).
PRELIMINARY
(see section 6.4.2)
(see section 6.4.3)
(see section 6.4.4)
Q
IS0053302-00 7