Uninstalling Sansurfer Control Ix; Windows 2000; Red Hat Linux - Qlogic QLA4010 User Manual

Q
8. The Install Complete dialog box displays
9. To run SANsurfer Control iX, click Start, select Programs, select the install
group (the default is QLogic Corporation), then click SANsurfer Control iX.
If you selected Desktop in
6.2.2

Uninstalling SANsurfer Control iX

6.2.2.1

Windows 2000

To uninstall the SANsurfer Control iX GUI for Windows 2000, do the following:
From the Start menu, point to Programs, point to QLogic Corporation, point to
SANsurfer Control iX, then click Uninstall SANsurfer Control iX.
6.2.2.2

Red Hat Linux

Follow these steps to uninstall the SANsurfer Control iX GUI for Red Hat Linux:
1. Change to the directory where SANsurfer Control iX is installed. For example,
type the following and then press ENTER:
2. Type the following to uninstall the SANsurfer Control iX GUI:
IS0053302-00 7
Figure 6-6. Install Complete Dialog Box
cd /opt/QLogic_Corporation/SANsurfer_Control_iX
./Uninstall_SANsurfer_Controlix
PRELIMINARY
(see figure
step 5, double-click the icon on your desktop.
6 – SANsurfer Control iX
Installing SANsurfer Control iX
6-6). Click Done.
6-5