Updating The Existing Driver - Qlogic QLA4010 User Manual

3 – Windows 2000 Driver Installation
Installing the Driver
11. Windows 2000 displays the Found New Hardware—Network Controller
message. The Found New Hardware Wizard program is launched to begin
installing the QL4010.SYS driver for the QLA4010.
12. Click Next.
13. In the Install Hardware Device Drives dialog box, select Search for a suitable
driver for my device (recommended). Click Next.
14. Select specify a location. Click Next.
15. In the Copy manufacture's files from: dialog box, type or browse the path to
the QLogic driver directory. For example:
16. Insert the QLogic driver disk created in
17. In the Driver Files Search Results dialog box, click Next.
18. If the Digital Signature Not Found dialog box displays, click Yes.
19. In the Completing the Found New Hardware Wizard dialog box, click Finish.
20. The following message displays:
Click Yes.
After QLogic obtains a Digital Signature for the driver through the official WHQL
process from Microsoft, the Digital Signature Not found dialog box will not display.
(can this sentence, which is in other HBA user's guides, be removed?)
3.4.3

Updating the Existing Driver

Perform the following steps if the QL4010.SYS driver is already installed and you
want to install an updated version of the driver:
1. To start the Device Manager, click Start, point to Settings, click Control Panel,
double-click the System applet, select the Hardware tab, and click the Device
Manager button.
2. Use the scroll bar to scroll down the list of hardware types. Double-click SCSI
and RAID Host Bus Adapter.
3. Double-click QLogic QLA4010 PCI iSCSI Adapter from the devices list. The
Adapter Property window displays.
4. Click the Driver tab, then click Update Driver to start the Upgrade Device
Driver Wizard. Click Next.
3-4
A:\
Your hardware settings have changed. You must restart your
computer for these changes to take effect.
Do you want to restart your computer now?
PRELIMINARY
section 3.3.
Q
IS0053302-00 7