Ipv6 Prefix List Log - Qlogic SANsurfer iSCSI HBA Manager User Manual

A
The IPv6 Prefix List dialog box opens
For the HBA port that you selected, the prefix list log shows the following
information.
Last Update Time The date-time stamp of the last router list entry. The
Prefix
Prefix Length
Prefix Preferred
Lifetime
Prefix Valid
Lifetime
Flags
For more detailed information, refer to the
Specification
NOTE:
5. If you want to refresh the log information immediately, click Refresh.
6. To exit the log, click Close.
IS0054602-00 B
Figure 6-10 IPv6 Prefix List Log
date-time stamp is in 12 hour format.
The local prefix of this entry.
The length of the local prefix for this entry.
The length in time that an address remains in the
preferred state in hours, minutes, and seconds.
The length in time that an address remains in the valid
state in hours, minutes, and seconds.
Valid entry=0x1; non-valid entry=0x0.
(see "Related Documents" on page
If text in any column is truncated, move the cursor over it to reveal the
entire text in a tool tip next to the cursor.
6 – Performing Diagnostics
(Figure 6-9).
ISP4xxx Firmware Interface
1-3).
Viewing Logs
6-15