Qlogic SANsurfer iSCSI HBA Manager User Manual page 99

A
d.
e.
f.
g.
4. To allow driver API (iSDMAPI) logging information to be saved to a file,
follow these steps:
a.
b.
c.
d.
e.
f.
5. When you are through modifying the diagnostic options, click Close.
IS0054602-00 B
Select the Log data only at specified level check box to log only at
the level selected under Logging Level. To log data at multiple levels,
clear this check box.
In the Log File Size box, enter the maximum size in KB of the logging
file. The default is 1000 KB; enter 0 (zero) to specify unlimited size.
In the Log File Name box, enter a file name with which the log will be
saved in the /tmp folder. The default file name is iSCSI_Agent.log.
To save these changes to the SANsurfer iSCSI HBA Manager agent
and non-agent diagnostic preferences, click Apply.
Under SANsurfer Agent & Non-Agent/JNI Diagnostic Preferences,
select the Enable Driver API (iSDMAPI) logging to a file check box.
For Logging Level, select one of the following levels of logging:
Error Level
Warning Level
Event Level
Trace Level
All Levels
Select the Log data only at specified level check box to log only at
the level selected under Logging Level. To log data at multiple levels,
clear this check box.
In the Log File Size box, enter the maximum size in KB of the logging
file. The default is 2000 KB; enter 0 (zero) to specify unlimited size.
In the Log File Name box, enter a file name with which the log will be
saved in the /tmp folder. The default file name is
isdmapi_agentdebug.log.
To save these changes to the SANsurfer iSCSI HBA Manager driver
API diagnostic logging options, click Apply.
6 – Performing Diagnostics
Tracing User and Agent Activity
6-23