Qlogic SANsurfer iSCSI HBA Manager User Manual page 3

S
Removed the following sections that were included
in rev. A of the user's guide. Information from these
sections is now in the SANsurfer iSCSI HBA Man-
ager help system:
7. Setting Up Connections
8. Monitoring the Connections
9. Displaying Host, HBA Port, Device, and LUN
Information
11. Updating the HBA
10. Performing Diagnostics
include procedures for viewing IPv6 logs and set-
ting diagnostic test parameters for running loop-
back and read/write buffer tests.
12. Troubleshooting section expanded to include a
list of troubleshooting tools, procedures for verify-
ing that the HBA driver and iqlremote are installed,
using debug to trace user interface and agent
activity, and retrieving records such as the HBA
core dump, Flash NVRAM, and HBA crash.
Added Windows 2008 support to FAQ table.
Moved Appendix C Contacting QLogic
to 1 Introduction.
Added index entries.
IS0054602-00 B
Management Tool for QLogic iSCSI Host Bus Adapters
section expanded to
information
SANsurfer iSCSI HBA Manager User's Guide
—
6 Performing Diagnostics
7 Troubleshooting
A Frequently Asked Questions
"Technical Support" on page 1-4
Index
Page iii