Specifying Whether The Configuration Refreshes When Host And Target Status Alarms Occur; Application Options: Update Behavior - Qlogic SANsurfer iSCSI HBA Manager User Manual

A
Specifying Whether the Configuration Refreshes When Host and Target Status
Alarms Occur
You can specify whether or not the SANsurfer iSCSI HBA Manager user interface
configuration refreshes each time your system receives a host status alarm or
target status alarm.
To specify whether the configuration refreshes:
1. On the Settings menu, click Application Options.
The Application Options dialog box
Figure 5-11 Application Options: Update Behavior
2. Under Update Behavior from the Host Status Alarms, select the following
options:
IS0054602-00 B
If you want to refresh the configuration when the host receives a host
status alarm or a target status alarm, select both the Enable All
Updates from Host Alarms check box and the Enable Updates from
Target Status Alarms check box.
If you want to refresh the configuration when the host receives a host
status alarm but not a target status alarm, select only the Enable All
Updates from Host Alarms check box.
If you do not want the configuration to refresh when the host receives a
host status alarm nor a target status alarm, clear the Enable All
Updates from Host Alarms check box.
Setting Up SANsurfer iSCSI HBA Manager
(Figure 5-11) opens.
5 – Getting Started
5-19