Cool Only Models - Whirlpool ACE082PT1 Use & Care Manual

To Set theTemperature
To raise the temperature:
Press the plus button to raise the temperature. Each time you
press or hold the plus button, the temperature will go up 1° to a
maximum temperature of 86°F (30°C).
To lower the temperature:
Press the minus button to lower the temperature. Each time you
press or hold the minus button, the temperature will go down 1°
to a minimum temperature of 64°F (18°C).
To Set the Timer Delay
To set Timer to turn off the air conditioner (air conditioner
must be on):
1. Press TIMER.Timer indicator light on the air conditioner
control panel will flash.
G
2,
3.
Press the plus or minus button to change the delay time from
1 to 24 hours.
Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
3. Press the plus or minus button to change delay time from 1 to
24 hours.
4. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, changing the
previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Cool, Fan, or Power Saver.
3. Adjust the fan speed to Turbo, High, Low, or Auto.
4. Adjust temperature between 64°F and 86°F (18°C and 30°C).
5. Turn off the air conditioner.
6. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
7. Press the plus or minus button to change delay time from 1 to
24 hours.
8. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
Model I Model 3
Wait three minutes before restarting
4
3 0 ow_R
2 6
1 7 MED
WARMER COOLER COOL
TEMPERATURE FAN SPEED
Wait three minutes before restarting
i
4 _ONLY
3WQ I LOW
2 6 COOL
_HIGH
COOL
TURBO
COOL
TEMPERATURE FAN SPEED
Model 2
Wait three minutes before reslarting
4
O
I LOW
2 6 COOL
41GH
1 7 L COOL
WARMER CO ER
TEMPERATURE FAN SPEED
1. Select the fan speed. See "Fan Speed."
2. Set temperature. See "Temperature."
Fan Speed
Set FAN SPEED to the desired setting. When the air conditioner
is operating at Low Cool, High Cool (on some models), Med Cool
(on some models) or Turbo Cool (on some models), the fan
circulates air continuously.
• Turbo Cool (on some models)--for maximum cooling
• High Cool (on some models)--for normal to maximum
cooling (depending on model)
13