Conversion Factors; Initializing Tests And Simulations; Error Messages - Fluke BP Pump 2 Operator's Manual

Conversion Factors

Conversion factors for the Tester are shown in Table 3-1.
Units
PSI_PER_MMHG
CMH2O_PER_MMHG
INH2O_PER_MMHG
KPA_PER_MMHG

Initializing Tests and Simulations

You can access functions of the Tester in two ways:
Exclusive use of soft keys, the row of up arrow keys just below the display
Combined use of the number keys and soft keys
For example, you may access a Pressure Source test as follows:
Soft keys only:
PRESSURE TESTS C STATIC PRESSURE C GAUGE C
SOURCE
Combined:
3 STATIC PRESSURE C GAUGE C SOURCE
Either method is acceptable, and it is assumed that you will develop your own,
most effective way of using the keys.

Error Messages

If you encounter any repeatable error messages, contact your Fluke Biomedical
Service Center.
Pressure Tests
The following tests assess the integrity and accuracy of the Tester, as well as the
instrument under test.
Table 3-1. Conversion Factors
Operation
Pressure Tests
mmHg
0.019337
1.3595
0.53525
0.13332
3
3-7