Warnings And Cautions - Fluke BP Pump 2 Operator's Manual

Warnings and Cautions

Users are advised to read the manual carefully, observing all warnings and
cautions, before attempting to set up and operate the Tester.
A Warning identifies hazardous conditions and actions that could cause
bodily harm or death.
A Caution identifies conditions and actions that could damage the Tester or
the equipment under test, or cause permanent loss of data.
To avoid possible electric shock or personal injury, follow
these guidelines:
Read the Users Manual before operating the Tester.
Use this Tester only in the manner specified by the
manufacturer or the protection provided may be
impaired.
Do not connect the Tester to a patient or equipment
connected to a patient. The Tester is intended for
equipment evaluation only and should never be used
in diagnostics, treatment or in any other capacity
where the Tester would come in contact with a patient.
Do not use the product in wet locations, around
explosive gases or dust.
Never open the Tester case, because dangerous
voltages are present. There are no user replaceable
parts in the Tester.
The Tester must be properly earthed. Only use a
supply socket that has a protective earth contact. If
there is any doubt as to the effectiveness of the supply
socket earth, do not connect the Tester.
Do not use a two-conductor adapter or extension cord;
this will break the protective ground connection.
Ensure that the external power source is properly rated
for the system.
Introduction and Specifications
General Safety Considerations
W X Warning
1
1-5