General Safety Considerations; Symbols - Fluke BP Pump 2 Operator's Manual

BP Pump 2
Operators Manual
Tester pressure accuracy can be improved by upgrading to a high-accuracy
pressure transducer. This is a factory service upgrade and is provided to
customers wanting to meet the DIN EN 1060 requirements for pressure
measurement accuracy. For more information, refer to "Setup, Maintenance,
and Support: Maintenance and Support."

General Safety Considerations

This Tester complies with safety and technical requirements described in the
following directives:
UL 3101-1, Electrical Equipment for Laboratory Use; Part 1: General
Requirements.
CAN/CSA C22.2 No. 1010.1 (1992), Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use, Part 1: General
Requirements.
EC 73/23/EEC (Amended 93/68/EEC) EN61010-1:2001, Safety
requirement for electrical equipment for measurement, control and
laboratory use, Part 1: General Requirements.

Symbols

Table 1-1 describes symbols used in association with the Tester.
Symbol
Risk of danger. Important
W
information. See manual.
Intertek Electrical Test
Laboratory listed.
Œ
Conforms to relevant
Canadian and U.S.
standards.
Do not dispose of this
product as unsorted
~
municipal waste. Contact
Fluke or a qualified
recycler for disposal.
1-4
Table 1-1. Symbols
Description Symbol
Hazardous voltage. Risk
X
of electrical shock.
Conforms to European
P
Union directives
Description