Activex Test Method; Ports Used For Testing; Windows Vista Settings; Mac Os X Endpoint Settings - Extreme Networks Sentriant AG Software User's Manual

End-user Access

ActiveX Test Method

Ports Used for Testing

You might need to configure some firewalls and routers to allow Sentriant AG to access port 1500 for
ActiveX testing.
NOTE
See "Ports used in Sentriant AG" on page 425

Windows Vista Settings

All Windows Vista endpoints must have administrator permissions in order for the ActiveX component
to install successfully. If the end-user is not logged in to the endpoint with administrator permissions,
the following occurs:
If User Account Control (UAC) is enabled, Windows Vista prompts you for credentials. After the
●
credentials are entered, the ActiveX component installs.
If UAC is disabled, the ActiveX component installation fails without notifying the end-user.
●
See the following link for details on UAC:
http://technet2.microsoft.com/WindowsVista/en/library/0d75f774-8514-4c9e-ac08-
4c21f5c6c2d91033.mspx?mfr=true

Mac OS X Endpoint Settings

This release of Sentriant AG supports only the agent-based method of testing for Mac OS X.
Ports Used for Testing
You might need to configure some firewalls and routers to allow Sentriant AG to access port 1500 for
agent-based testing.
NOTE
See "Ports used in Sentriant AG" on page 425

Allowing Sentriant AG through the OS X Firewall

To verify that Sentriant AG can test the end-user through the end-user's firewall:
Mac endpoint>>Apple Menu>>System Preferences
170
for a complete description of the ports used in Sentriant AG.
for a complete description of the ports used in Sentriant AG.
Sentriant AG Software Users Guide, Version 5.3