Downloading The Exe File; Running The Windows Installer - Extreme Networks Sentriant AG Software User's Manual

Remote Device Activity Capture
First, download the executable file to your Windows server, then run the installer to install the first
interface. For this release, if you want to add additional interfaces, you must install them manually. A
future release will expand the options in the installer to include multiple interfaces. Add any additional
interfaces and start the service.

Downloading the EXE File

To download the EXE file to a Windows machine:
Browser window
Download and save the EXE file to a Windows machine. Copying files is described in
on page 34. The EXE file can be downloaded directly from the MS:
/usr/local/nac/webapps/ROOT/installers/DACInstaller.exe

Running the Windows Installer

The Windows installer performs the following tasks:
Installs the DAC software
●
Installs the JavaJRE software if needed
●
Installs the WinPcap software if needed
●
Modifies the wrapper.conf file
●
Installs DAC as a Windows service
●
NOTE
If you have already installed DAC, you must uninstall it before attempting to install a newer version. See the
"Removing the Software" on page 282
NOTE
If you have made configuration changes to the wrapper.conf file in a previous version of DAC, when you remove and
re-install DAC, your changes are not saved. You will need to re-enter any changes, such as adding additional
interfaces or ESs to the wrapper.conf file after installing DAC. You can save your previous wrapper.conf file before
you uninstall DAC for reference; do not save the old wrapper.conf file and copy it over the new wrapper.conf file.
To run the Windows installer:
Windows server
1 Navigate to the EXE file downloaded in
2 Double-click on the EXE file. The DAC InstallShield Wizard Welcome window appears:
272
for instructions.
"Downloading the EXE File" on page
"Copying Files"
272.
Sentriant AG Software Users Guide, Version 5.3