Notifications; Enabling Notifications - Extreme Networks Sentriant AG Software User's Manual

System Configuration
Table 6: Resource Tips
Topic
DHCP server IP
address
Domain controller
name
DHCP server and
Domain controller
Windows update server

Notifications

The Notifications menu option allows you to configure email notifications sent to announce test alerts
and system errors. You can configure the following:
Send email notifications
●
Elect not to send notifications
●

Enabling Notifications

To enable email notifications:
Home window>>System configuration>>Notifications
126
Tip
In inline mode, you might need to specify the DHCP server
IP address in this field.
Regardless of where the Domain Controller (DC) is installed,
you must specify the DC name on the Quarantine tab in the
Quarantine area domain suffix field for each quarantine area
defined.
In DHCP mode, when your DHCP server and Domain
Controller are behind Sentriant AG, you must specify ports
88, 135 to 159, 389, 1025, 1026, and 3268 as part of
the address. If you do not specify a DHCP address, users
are blocked. If you specify only the IP address with no port,
endpoints are not quarantined, even for failed tests. If your
domain controller is not situated behind Sentriant AG, you
must configure your router to allow routes from the
quarantine area to your domain controller on ports 88, 135-
159, 389, 1025, 1026, and 3268.
In inline mode, if an endpoint is quarantined and needs to
access the Windows Update server, it is not able to unless
you enter 207.46.0.0/16 here. This is because iptables
needs an IP address, and would not be able to resolve the
default of windowsupdate.com.
Sentriant AG Software Users Guide, Version 5.3