Starting The Windows Service - Extreme Networks Sentriant AG Software User's Manual

1 Open the
DAC/conf/wrapper.conf
a Locate the Application Parameters section in the wrapper.conf file.
You will see a list of entries like the following:
wrapper.app.parameter.X
Where X is the numerical value representing the order in which the
parameter will be added to the command.
b Add additional ESs:
1) Locate the line that represents the initial ES, for example
wrapper.app.parameter.8=172.17.100.100
2) Add another line just below the initial ES with the new IP address
or addresses:
wrapper.app.parameter.9=172.17.100.150
wrapper.app.parameter.10=172.50.50.7
3) Increment the rest of the wrapper.app.parameter numbers by the
number of ESs added. For this example of adding two ESs, increment
by two; change 10 to 12, 11 to 13, and so on
wrapper.app.parameter.11=-i
wrapper.app.parameter.12="\Device\NPF_{54052575-E4CC-46A5-B626-9167DD4F9BE3}"
wrapper.app.parameter.13=-f
wrapper.app.parameter.14="udp src port 67"

Starting the Windows Service

You can start the Windows service manually, or you can reboot the Windows server, which starts the
service automatically.
To start the Windows service manually:
Windows server
Sentriant AG Software Users Guide, Version 5.3
file with a text editor.
Remote Device Activity Capture
:
281