Table 7: Default Test Names And Descriptions - Extreme Networks Sentriant AG Software User's Manual

NOTE
While editing the description avoid the use of double quotes "". Use single quotes instead. Double quotes will get
interpreted by the software and can cut the string short or cause the replacement to fail.
2 Once your custom strings script is complete, and you are ready to push it out to all of the ESs:
a Verify that the scripts and base classes are under the Custom directory tree as specified above.
b Enter the following on the command line of the Sentriant AG MS:
installCustomTests
This command compiles the Python source files, builds an RPM, updates the policy groups, and sends
these changes to all ESs.

Table 7: Default Test Names and Descriptions

Test name
checkAntiVirusUpdates.String.1
checkAntiVirusUpdates.String.2
checkAntiVirusUpdates.String.3
checkAntiVirusUpdates.String.4
checkAntiVirusUpdates.String.5
checkAntiVirusUpdates.String.6
checkAutoUpdateStatus.String.1
checkAutoUpdateStatus.String.2
checkAutoUpdateStatus.String.3
checkAutoUpdateStatus.String.4
Sentriant AG Software Users Guide, Version 5.3
Description
The required anti-virus software was not found.
Install anti-virus software and keep the virus
definitions up-to-date. Supported Anti Virus
software: %s,
%s is installed but the service is not running and
the virus signatures are not up-to-date (installed:
%s required: %s).,
%s is installed but the service is not running.,
(version: %s),
%s is installed but the virus signatures are not up-
to-date (installed: %s required: %s).,
The %s service is running and virus signatures are
up-to-date.,
The OS is not relevant to this test.,
The auto_update_level_required parameter is
required.,
Automatic Updates have not been configured. For
Windows 2000, install Service Pack 4, then enable
Automatic Updates by selecting: Control
Panel>>Automatic Updates. For Windows XP:
select Control Panel>>System>>Automatic Updates
tab.,
Automatic Updates are set to: %s,
End-user Access
195