Windows 2000 Professional Setup - Extreme Networks Sentriant AG Software User's Manual

802.1X Quarantine Method
2 Configure the network connections:
Windows desktop>>Start>>Settings>>Control Panel>>Network Connections
3 Right-click on Local Area Connection. Select Properties. The Local Area Connection windows
appears (Figure 138 on page
4 Select the General tab.
5 Select the Show icon in notification area when connected check box. This enables the Windows XP
balloon help utility, which can assist you when entering information and troubleshooting errors.
6 Select the Authentication tab
a Select the Enable IEE 802.1X authentication for this network check box.
b Select an EAP type from the drop-down list. For this example, select MD5-Challenge.
c Clear or select the Authenticate as computer when computer information is available check box.
The choice is yours.
7 Click OK.
8 Select to reboot if prompted.

Windows 2000 Professional Setup

To enable a Windows 2000 Professional endpoint for 802.1X:
1 Start the wireless service:
Windows desktop>>Start>>Settings>>Control Panel>>Administrative Tools>>Services
a Select Wireless Configuration. If the Status column does not already show Started, start the
service:
1) Right click on Wireless Configuration.
2) Select Start.
b Close the Services window.
2 Configure the network connections:
Windows desktop>>Start>>Settings>>Control Panel>>Network and Dial-up Connections
244
242).
(Figure 139 on page 243).
Sentriant AG Software Users Guide, Version 5.3