Agentless Test Windows; Figure 111: End-User Login Credentials - Extreme Networks Sentriant AG Software User's Manual

End-user Access
NOTE
Install any needed patches before installing the Agent.

Agentless Test Windows

If the end-users select Agentless test, Sentriant AG needs login credentials in order to test the endpoint.
Credentials can be obtained from the following:
Automatically connect the user through domain authentication
●
page 131)
Require the user to log in. End-users must set up their local endpoints to have a Windows
●
administrator account with a password in order to be tested by Sentriant AG.
NOTE
Sentriant AG uses the Windows Messenger Service when using agentless testing. If you have disabled this service
(http://www.microsoft.com/windowsxp/using/security/learnmore/stopspam.mspx), agentless testing will not work.
NOTE
If the end-user has not defined a login/password combination, the default login is usually administrator with a blank
password.
If the end-users are required to log in, or if the automatic connection methods fail, they must log in
using the following window:

Figure 111: End-user Login Credentials

If the Allow end-users to have their administrator login information saved for future access option is
selected on the System Configuration>>Testing methods window, the end-user login window presents
a check box option to the end-users, allowing them to save their login credentials.
188
("Agentless Credentials" on
Sentriant AG Software Users Guide, Version 5.3