Configuring Your Sensor; Allowing Sentriant Ag Through The Firewall - Extreme Networks Sentriant AG Software User's Manual

Hide thumbs Also See for Sentriant AG:

Table of Contents

Configuring the Post-connect Server

<endpoint IP> is the IP address of an endpoint known to Sentriant AG. For example, 192.168.40.40

are text strings that describe the reasons to quarantine the specified

endpoint. For example, "P2P Software Installed", or "Latest Windows XP Service Pack not applied".

Configuring Your Sensor

Configure your post-connect sensor to call

with the IP address of the

Connector_ActionScript.py

endpoint to quarantine and the reasons to quarantine.

Sentriant AG needs to communicate with the post-connect server through port 61616. See

"Allowing the

Windows RPC Service through the Firewall" on page 168

for instructions on how to open a port on a

Windows machine.

Sentriant AG Software Users Guide, Version 5.3

Sentriant ag 5.3