Extreme Networks Sentriant AG Software User's Manual page 238

802.1X Quarantine Method
type= radius
authhost= <RADIUS host or IP>:<RADIUS auth port>
accthost= <RADIUS host or IP>:<RADIUS acct port>
secret= <the shared secret for your RADIUS server>
}
d Save and exit the file.
NOTE
The realm NULL section must go after the realm LOCAL section, or you can comment out the realm LOCAL section.
2 Configure your RADIUS server to allow the Sentriant AG IP address as a client with the shared
secret specified in the previous step. See your RADIUS server's documentation for instructions on
how to configure allowed clients.
3 Configure the
VLANS. See comments in the following sample file for instructions.
#
# FreeRADIUS Connector configuration file
#
#
# TO DO - Change localhost to your server's IP if this is not the built-in
FreeRADIUS server
#
ServerUrl=https://localhost/servlet/AccessControlServlet
DebugLevel=4
Debug=on
Username=nacuser
Password=nacpwd
#
# TO DO - Modify the vlan ids and names to match your switch configuration
#
#
# Use these attributes for all non-Extreme switches
#
#
# Uncomment these two sections if you want the connector to specify the normal user
vlan
# rather than specifying it for each user in the users configuration file.
#
238
SAFreeRADIUSConnector.conf
file with the appropriate RADIUS attributes and
Sentriant AG Software Users Guide, Version 5.3