6.
Click the button above any of the fingers to begin the enrollment process for that
finger.
7.
Swipe the finger until the progress bar reaches 100% to enroll that finger.
8.
Repeat the process for all the fingers you wish to enroll (see sidebar), and then
click Save and Continue.
9.
Enter a backup password and click Apply.
10. Close the fingerprint status window.
Modules & Options
Fingerprint
Enrollment
Note that it is strongly rec-
ommended that you enroll
more than one finger in
case of injury etc.
Figure 7 - 49
Fingerprint Status
Fingerprint Reader Module 7 - 53
7
Need help?
Do you have a question about the Notebook V09.2.00 and is the answer not in the manual?
Questions and answers