EUROCOM Notebook V09.2.00 User Manual page 143

For Model A
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the SIM card cover and loosen screw
3. Remove the SIM card cover
For Model B
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the RAM & CPU bay cover and remove screws
3. Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
4. Carefully disconnect the fan cable
Model A
1
2
.
1
.
2
, and remove the cover
6
3
Model B
4
5
7
6
-
.
3 5
.
7
Fan Cable
Make sure you re-
connect the fan cable
6 before screwing
down the bay cover.
3.75G/HSPA Module 7 - 35
Modules & Options
Power Safety
Warning
Before you undertake
any installation proce-
dures, make sure that
you have turned off the
power, and disconnect-
ed all peripherals and
cables (including tele-
phone lines). It is advis-
able to also remove your
battery in order to pre-
vent accidentally turning
the machine on.
Figure 7 - 29
SIM Card Cover/
RAM & CPU
Bay Cover Removal
7