Failing The Post; Fatal Errors; Non-Fatal Errors - EUROCOM Notebook V10.1.00 User Manual

Failing the POST

Errors can be detected during the POST. There are two categories, "fatal" and "non-
fatal".

Fatal Errors

These stop the boot process and usually indicate there is something seriously wrong
with your system. Take the computer to your service representative or authorized
service center as soon as possible.

Non-Fatal Errors

This kind of error still allows you to boot. You will get a message identifying the
problem (make a note of this message!) followed by the prompt:
• Press <F1> to resume
• <F2> to enter Setup
Press F1 to see if the boot process can continue. It may work, without the correct
configuration.
Press F2 to run the Setup program and try to correct the problem. If you still get an
error message after you change the setting, or if the "cure" seems even worse, call
for help.
Incorrect settings can
cause your system to
malfunction. To correct
mistakes, return to Set-
up and restore the Set-
up Defaults with <F9>.
The Power-On Self Test (POST) 5 - 3
BIOS Utilities

BIOS Settings
Warning
5