Removing And Installing The Video Card; 2 - 18 Video Card Removal Procedure - EUROCOM W880CU Service Manual

Removing and Installing the Video Card

Video Card Removal Procedure
Turn off the computer, and turn it over and remove the battery
1.
Remove screws - and fan cables
2.
1 6
( ).
Figure 13b
Remove screws - from the heat sink unit in the order indicated on the label: screw 6 first through to screw 1
3.
11 16
( ).
last Figure 13c
a.
1
2
7
3
b.
9
(page 2 -
& ( Figure 13a ) Remove the VGA & CPU fan units
.
7 8
4
5
8 6
c.
10
Screw 3
Screw 1
Screw 5
5) and component cover (page 2 -
&
9

Heat Sink Screw Removal
and Insertion
Remove the screws from the heat
sink in the reverse order: 6-5-4-3-
2-1 (the numbers 1 - 6 are imprin-
ted on the heat sink itself).
When tightening the screws, make
sure that they are tightened in the
right order (1 - 6).
12 Screw 2
13
Screw 4
14
11
15
16
Screw 6
Removing and Installing the Video Card 2 - 17
Disassembly
Figure 13
Video Card
Removal
10)
.
a. Remove the fan screws
10
and fan cables.
b. Remove the fan units.
c. Remove the heat sink
screws in the reverse
order as indicated on
the label.

Caution
The heat sink, and video
card area in general,
contains parts which are
subject to high tempera-
tures. Allow the area
time to cool before re-
moving these parts.

9. VGA Fan Unit
10. CPU Fan Unit
• 12 Screws