Table of Contents
Advertisement
Before Use
Before Use
Before Using Network Control Software
I f the system is Windows 2000, NT 4.0 or XP, the PC should be started by the
Administrator.
B efore starting the Network Control software, please check the following.
(1) The computer is installed with Network Control software.
(2) The projector is powered on and the LAN wire is well connected to the projector.
(3) Make sure the computer and projector can connect to network. Network Control
software needs to arrange in TCP/IP network communication and the network cable.
Activate Network Control Software
C lick Network control software icon.
M onitor window will show as Graph 1.
<Graph 1>
35
Advertisement
Table of Contents
