Iii-3-3. Ap Bridge-Point To Point Mode - Edimax EW-7428HCn User Manual

its SSID, in which case you will need to manually enter the SSID in the "MAIN
SSID" field on the previous page.
III-3-3. AP Bridge-Point to Point Mode
In this mode, the access point connects to another wireless access point in the
same mode, and all connected Ethernet clients of both devices will be
connected together. This allows two physically isolated networks to
communicate with each other.
Note: When you set the device to this mode, it will
not accept regular wireless clients any more.
Band
Channel
Please select the wireless band you wish to
use. By selecting different band settings,
you'll be able to allow or deny access points
using certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only access points using the
wireless band you select (802.11b, 802.11n,
or 802.11g) will be able to connect to this
device.
If you select 2.4GHz (B+G), then only access
points using the 802.11b and 802.11g bands
will be able to connect to this device.
If you want to allow 802.11b, 802.11g, and
802.11n access points to connect to this
device, select 2.4GHz (B+G+N).
Please select the channel number you wish
35