Edimax EW-7428HCn User Manual page 40

Channel
Number
Associated
Clients
MAC address
1-4
Set Security
Click "APPLY" to make changes take effect. The following message will appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
Multiple ESSID
When you click the "Multiple ESSID" button, a new window will open, as
shown below. This page allows you to configure the wireless settings for
access point's SSIDs. You can input a
numeric VLAD ID value between 1 – 4094
for the MAIN ESSID.
Please select a channel number you wish to
use. The channel number must be same as
the other wireless access points you wish to
connect to.
Click the "Show Active Clients" button and a
new window will appear, which contains
information about all wireless clients
connected to this access point. You can click
the "Refresh" button in the popup window
to keep the information up-to-date.
Please input the MAC addresses of the
wireless access point you wish to connect
to.
Click this button to select an encryption
mode for this wireless link. A popup window
with security options will appear.
40