Edimax EW-7428HCn User Manual page 64

Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
DHCP Server
The access point can be configured to act as a DHCP server for your network.
By default DHCP is disabled.
DHCP Server
Default Gateway Input the IP address of the default gateway
Domain Name
Server IP
Start IP
End IP
Domain Name
Lease Time
Select "Enabled" to enable DHCP server
functionality. Select "Disabled" to disable it,
in which case subsequent fields will be
grayed out.
of your network here.
Input the IP address of the domain name
server (DNS).
Input the start address of the IP range.
Input the end address of the IP range.
Input the domain name for your network
(optional).
Specify a lease time (the duration that every
computer can keep a specific IP address) of
every IP address assigned by the access
point.
64