Ap Bridge-Point To Point Mode - Edimax EW-7416APn User Manual

Wireless 802.11n access point

Hide thumbs Also See for EW-7416APn:

Table of Contents

Connection

2-4-3 AP Bridge-Point to Point Mode

In this mode, this wireless access point will connect to another wireless

access point which uses the same mode, and all wired Ethernet clients of

both wireless access points will be connected together. You can use this

mode to connect a network to another network which is physically

isolated.

Please note that when you set your access point to this mode, it will not

accept regular wireless clients anymore.

When you select 'AP Bridge-Point to Point', the following options will

be displayed:

Here are descriptions of every setup item:

Band

Select an access point and click this button to

choose the network. The SSID name of the access

point you have selected will be displayed in the

Main SSID in the Basic Setting page.

Please select the wireless band you wish to use. By

selecting different band setting, you'll be able to

allow or deny the wireless client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz

Table of Contents