Edimax EW-7428HCn User Manual page 52

Fragment
Threshold
RTS Threshold
Beacon Interval
DTIM Period
Data Rate
N Data Rate
Channel Width
Preamble Type
Broadcast ESSID Decide if the device will broadcast its own
Set the Fragment threshold of the wireless
radio. Please do not modify the default
value if you don't know what this does, the
default value is 2346
Set the RTS threshold of the wireless radio.
Please do not modify the default value if
you don't know what this does, the default
value is 2347
Set the beacon interval of the wireless
radio. Please do not modify the default
value if you don't know what this does, the
default value is 100
Set the DTIM period of wireless radio.
Please do not modify default value if you
don't know what it is, the default value is 3
Set the wireless data transfer rate. Since
most wireless devices will negotiate with
each other and pick a proper data transfer
rate automatically, it's not necessary to
change this value unless you know what
will happen after modification.
Set the data rate of 802.11n clients,
available options are MCS 0 to MCS 15. It's
safe to set this option to "Auto" and it's not
necessary to change this value unless you
know what will happen after modification.
Select wireless channel width (bandwidth
used by wireless signals from this access
point). It's suggested you select "Auto
20/40MHz". Do not change to "20 MHz"
unless you know what that does.
Set the wireless radio preamble type. Please
do not modify the default value if you
don't know what this does, the default
value is "Short Preamble".
ESSID. You can hide the ESSID of your
wireless access point (set the option to
"Disable"), so only people who know the
ESSID of your wireless access point can
52