Edimax EW-7428HCn User Manual page 17

network.
3. By default, the device's SSID is the root access point's SSID plus the last six
characters of the device's access key. You can change the device's SSID if
you want. Click "Next" to complete the setup.
4. The device will test the connection between itself and the root wireless
access point.
If the connection is successful, the message "Connection Test Successfully"
will appear on-screen. Click "Next" to save settings.
If the connection failed, the message "Connection Test Failed" will appear
on-screen. Click "Back" to restart the setup process.
5. The device will show a brief summary of the name of the root wireless
access point, the name of the device, and the security type used. Click
"APPLY" to continue, or click "Back" to restart the setup process.
6. After you click "APPLY" the device will restart and save its settings. You will
see a final congratulations page. Your computer will be disconnected from
the extender at this time. To reconnect to the extender, select its SSID from
your list of Wi-Fi networks.
17